Equilibrium modeling and kinetic studies on the adsorption of basic dye by a low-cost adsorbent: coconut (Cocos nucifera) bunch waste

In this paper, the ability of coconut bunch waste (CBW), an agricultural waste available in large quantity in Malaysia, to remove basic dye (methylene blue) from aqueous solution by adsorption was studied. Batch mode experiments were conducted at 30 degrees C to study the effects of pH and initial concentration of methylene blue (MB). Equilibrium adsorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of adsorption. The adsorption isotherm data were fitted well to Langmuir isotherm and the monolayer adsorption capacity was found to be 70.92 mg/g at 30 degrees C. The kinetic data obtained at different concentrations have been analyzed using a pseudo-first-order, pseudo-second-order equation and intraparticle diffusion equation. The experimental data fitted very well the pseudo-second-order kinetic model.     

Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: equilibrium, kinetic and thermodynamic studies

Adsorption isotherm and kinetics of methylene blue on activated carbon prepared from coconut husk were determined from batch tests. The effects of contact time (1-30 h), initial dye concentration (50-500 mg/l) and solution temperature (30-50 degrees C) were investigated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The equilibrium data were best represented by Langmuir isotherm model, showing maximum monolayer adsorption capacity of 434.78 mg/g. The kinetic data were fitted to pseudo-first-order, pseudo-second-order and intraparticle diffusion models, and was found to follow closely the pseudo-second-order kinetic model. Thermodynamic parameters such as standard enthalpy (DeltaH degrees), standard entropy (DeltaS degrees) and standard free energy (DeltaG degrees) were evaluated. The adsorption interaction was found to be exothermic in nature. Coconut husk-based activated carbon was shown to be a promising adsorbent for removal of methylene blue from aqueous solutions.     

Batch removal of malachite green from aqueous solutions by adsorption on oil palm trunk fibre: equilibrium isotherms and kinetic studies

Oil palm trunk fibre (OPTF)--an agricultural solid waste--was used as low-cost adsorbent to remove malachite green (MG) from aqueous solutions. The operating variables studied were contact time, initial dye concentration, and solution pH. Equilibrium adsorption data were analyzed by three isotherms, namely the Freundlich isotherm, the Langmuir isotherm, and the multilayer adsorption isotherm. The best fit to the data was obtained with the multilayer adsorption. The monolayer adsorption capacity of OPTF was found to be 149.35 mg/g at 30 degrees C. Adsorption kinetic data were modeled using the Lagergren pseudo-first-order, Ho's pseudo-second-order and Elovich models. It was found that the Lagergren's model could be used for the prediction of the system's kinetics. The overall rate of dye uptake was found to be controlled by external mass transfer at the beginning of adsorption, then for initial MG concentrations of 25, 50, 100, 150, and 300 mg/L the rate-control changed to intraparticle diffusion at a later stage, but for initial MG concentrations 200 and 250 mg/L no evidence was found of intraparticle diffusion at any period of adsorption. It was found that with increasing the initial concentration of MG, the pore-diffusion coefficient increased while the film-diffusion coefficient decreased.     

Kinetics and equilibrium studies of malachite green adsorption on rice straw-derived char

In this work, the potential feasibility of rice straw-derived char (RSC) for removal of C.I. Basic Green 4 (malachite green (MG)), a cationic dye from aqueous solution was investigated. The isotherm parameters were estimated by non-linear regression analysis. The equilibrium process was described well by the Langmuir isotherm model. The maximum RSC sorption capacity was found to be 148.74 mg/L at 30 degrees C. The kinetics of MG sorption on RSC followed the Lagergren's pseudo-first-order model and the overall rate of dye uptake was found to be controlled by external mass transfer at the beginning of adsorption, while intraparticle diffusion controlled the overall rate of adsorption at a later stage. The results indicated that RSC was an attractive adsorbent for removing basic dye from aqueous solutions.     

Infrastructure Condition Prediction Models for Sustainable Sewer Pipelines

The Federation of Canadian Municipalities reported that approximately 55% of sewer infrastructure in Canada did not meet current standards. Therefore, the burden on Canadian municipalities to maintain and prioritize sewers is increasing. One of the major challenges is to develop a framework to standardize the condition assessment procedures for sewer pipelines. Lack of detailed knowledge on the condition of sewer networks escalates vulnerability to catastrophic failures. This research presents a proactive methodology of assessing the existing condition of sewers by considering various physical, environmental, and operational influence factors. Based on historic data collected from two municipalities in Canada, structural and operational condition assessment models for sewers are developed using the multiple regression technique. The developed regression models show 82 to 86% accuracy when they are applied to the validation data set. These models are utilized to generate deterioration curves for concrete, asbestos cement, and polyvinyl chloride sewers in relation to traffic loads, bedding materials, and other pipe characteristics. The developed models are expected to assist municipal engineers in identifying critical sewers, prioritizing sewer inspections, and rehabilitation requirements.     

Second Stage Gas Turbine Blade Premature Replacement Investigation

This article investigates the root causes of the premature failure and replacement of a set of second-stage turbine blades from a heavy industrial gas turbine engine. The investigations included dye-penetrant testing, optical microscopy, X-ray diffractometry (XRD), Environmental Scanning Electron Microscopy (ESEM), and energy dispersive X-ray spectroscopy (EDS) techniques. Moreover, the effect of heat treatment process on restoring the blade microstructure so that the properties were suitable for service was also explored. As a result of the investigation, the second-stage turbine blades premature failure was attributed to the grain boundary secondary phase precipitates. These precipitates were present in the “as-found” condition of the investigated blades.     

Integrated resource strategic planning in China

Many governments around the world are focusing on emissions reduction through energy efficiency improvements, particularly on the demand side. Although Integrated Resource Planning (IRP), which considers both supply-side and demand-side options, had been a useful tool in the planning process for the power industry, its effectiveness has been challenged recently with the restructuring of the power sector that has occurred in China and elsewhere around the world. The paper proposes Integrated Resource Strategic Planning (IRSP) as an alternative to IRP in a deregulated power sector. IRSP takes the resource planning process one step further to the national level. In this paper, the authors demonstrate the tremendous potential for efficiency improvements on both the supply and demand sides of the power sector in China with IRSP. The results show that between 2009 and 2020, the potential for electricity savings will reach about 1228.5 TWh, and the potential reduction in carbon dioxide (CO₂) emissions will be about 1020.5 million tons. Another important finding of this study is that the current market-based pricing system in China should be improved to provide sufficient incentives for pursuing energy savings on the demand side.     

Nickel oxide nanoparticles grown on mesoporous carbon as an efficient electrocatalyst for urea electro-oxidation

Nickel oxide nanoparticles were formed on mesoporous carbon (NiO/MC) through precipitating nickel hydroxide species followed by post annealing treatment. The as-prepared electrocatalysts were physically characterized using XRD, Raman, EDX, SEM, TEM and HRTEM analysis techniques. Very fine nanoparticles were shown in TEM image and their chemical identity was proved in XRD pattern by three crystal indices of nickel oxide species as (111), (200) and (220). The electrocatalytic activity of NiO/MC electrocatalysts was investigated for oxidizing urea molecules in 0.5 M NaOH solution. Adding variable nickel oxide loading values during the electrocatalyst preparation method appreciably affected the obtained oxidation current density. Increasing the deposited oxide weight percentage would enhance the activity of formed nanocomposite to attain its optimum performance at the electrocatalyst containing 17.5 wt% NiO. The effect of altering urea concentration and scan rate during the oxidation process on the resultant electrocatalyst activity was studied. Chronoamperograms displayed improved steady state oxidation current density values after 1800 s revealing stable nanocatalysts. This promising electrocatalytic behavior of NiO/MC elects its application as an active component for urea electro-oxidation in many potential applications including hydrogen production, fuel cells and water purification.